Winston Industries PF56C Manuel de service télécharger pdf (Page 169)

4. Remove drain valve.

CAUTION:

Utilize care not to apply too much torque to drain valve in Step 4 causing bush-

ing connected to fryer to crack or separate from cone.

Place locking plate over new drain valve. Note location of holes in drain valve bracket.

Holes in locking plate when placed over drain valve must line up with holes in bracket.

Apply pipe sealant to threads of new drain valve.

Insert new drain valve through bracket and secure to cooking vessel.

Replace screws and nuts securing locking plate to bracket.

Replace nut securing drain valve extension handle to drain valve.

CAUTION:

Make sure drain valve is closed (handle in UP position) prior to filling with

shortening.

REPLACE INDICATOR LAMP (ITEM NO. 10, 11, 19)

Tools:

Phillips Screwdriver #2; Needle Nose Pliers.

Procedure:

DANGER: Turn off electrical power and disconnect electrical power supply. If unit is

hardwired, CIRCUIT BREAKER MUST BE OFF.

Remove the two (2) screws securing eyebrow to relay panel and save for reuse.

CAUTION: Utilize care in preventing escutcheon from falling forward when removing

screws in step 3.

Remove the four (4) screws securing escutcheon to

relay

panel and save for reuse.

Lower

escutcheon slowly until secure in open position.

Remove wires connected to indicator lamp.

Using needle nose pliers, depress retaining ears while pushing indicator lamp through

escutcheon.

Insert new indicator lamp through escutcheon until retaining ears open, securing lamp

to escutcheon.

Connect wires to new indicator lamp.

Replace the four (4) screws securing escutcheon to relay panel.

Replace the two (2) screws securing eyebrow to relay panel and place unit back into service.

WINSTON

LIT.6710/REV.0/9-91

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 306 307

Pas de commentaire

Winston Industries PF56C Manuel de service Page 169